Features:
Foaming guns are foaming agents for doors and windows plugging and sealing tools.
Easy to use, excellent design, the operation becomes simple.Color: As picture
Materials: Aluminum alloy + plastic
Applicable Scope: Foam Special
Maximum Output Pressure: 20MPa
Instructions
-Before use: the foam cans up and down up to 1 minute.
-Screw the can into the adapter (do not overtake!)
-When the injector starts to work, press the board and let the foam flow for 10 seconds. The foam is filled with an extension tube. Drive out the residual air.
-Fix the needle to the nozzle.
-Flow control device with a new time with a tank syringe should be kept erect.
-The foam output is adjusted by the trigger and controlled by the flow adjustment screw. If the adjustment screw is tightened, the syringe plate is locked and it is not necessary to turn the adjustment screw more than three turns.
-Replace the tank when trying to shake the new tank, remove the empty cans. Quickly (within a minute) to install a new structure foam cans.
-The tank must be fast enough to prevent the foam from hardening in the adapter.
-Replace the needle with hardened foam if necessary.
-When cleaning the burner, remove the tank quickly. Turn the cleaning agent upside down to the burner adapter and press the trigger for complete cleaning.
-The foam hardening residue on the front mouth of the foaming gun is removed by the inside or the like. Use a metal brush or knife to clear the outside of the long tube.
Note
-Take some time to remove the tank.
-Do not "repair yourself", so damage the syringe.
-Do not crash the adapter with a hard object.
-Immediately after use, clean with a cleaning agent.
Package Included:
1 x Spray Foam Gun
Detail Pictures: