This listing is for a Brand New 25 Piece Presser Foot Set for SINGER Style Industrial High-Shank, Single-Needle Sewing Machines, including:
ARTISAN BROTHER CONSEW COLUMBIA JUKI MITSUBISHI NAKAJIMA REX SEIKO SINGER SIRUBA TAIKO TOYOTA
Many of the Feet have Factory Code Numbers stamped onto them which may be different than the numbers listed below. In most cases we have included these alternative part numbers in parentheses
This 25 Piece Presser Foot Set consists of the following:
HINGED RAISING FEET FOR TOPSTITCHING – RIGHT (“EDGE FEET”)
P813 / 12463H-3/16" Right hinged raising foot for topstitching. Also called "edge feet" This foot is ideal for long, fast and very even topstitching with a solid bottom. (12463RH-3/16”)
P814 / 12463H-1/4" Right hinged raising foot for topstitching. Also called "edge feet" This foot is ideal for long, fast and very even topstitching with a solid bottom. (12463RH-1/4”)
P811 / 12463H-1/16” Right hinged raising foot for topstitching. Also called "edge feet" This foot is ideal for long, fast and very even topstitching with a solid bottom. (12463RH-1/16”)
P812 / 12463H-1/8" Right hinged raising foot for topstitching. Also called "edge feet" This foot is ideal for long, fast and very even topstitching with a solid bottom. (12463RH-1/8”)
COMPENSATING TOPSTITCH FEET – RIGHT
CR-1/32N Compensating Topstitch Foot (Right) gives you a uniform topstitch 1/32" from the edge of your fabric. This is a Narrow Width foot. (CR 1/32”N)
CR-1/16 Compensating Topstitch Foot (Right) gives you a uniform topstitch 1/16" from the edge of your fabric. This is a Regular Width foot. (CR 1/16”E)
CR-3/16 Compensating Topstitch Foot (Right) gives you a uniform topstitch 3/16" from the edge of your fabric. This is a Regular Width foot. (CR 3/16”E)
CR-1/4 Compensating Topstitch Foot (Right) gives you a uniform topstitch 1/4" from the edge of your fabric. This is a Regular Width foot. (CR 1/4"E)
TEFLON FEET
T35 / 24983T This is the same as the #24983 Standard Double Toe Presser Foot BUT it has a Solid Teflon Bottom, making it very slippery. It is very useful with sticky fabrics or materials.
T363 / MT3 Teflon Foot, same as 40322SH standard zipper foot with solid Teflon bottom. (40322SHT)(T363)
T350 / MT9 Teflon Foot. This foot is similar to the 24983T, except that it has a flat, smooth bottom sole with a single needle hole. It is also very useful with sticky fabrics or materials. (T35 Single Needle Hole)
SHIRRING FEET
S952 Adjustable combination stitching or shirring foot. With the rear screw turned completely out, the foot sews like a regular sewing or seaming foot. As you turn the screw inward, the foot begins to shirr. Continue to turn the screw clockwise for more shirring.
P50H / 120828H HIGH shirring foot. This is the most popular shirring foot with a High Step for increased shirring on light to medium fabrics. Put your finger behind the foot to prevent easy feeding for maximum shirring. (P50)
SCROLL HEMMER FEET
160344 Scroll hemmer foot creates a beautiful double fold 1/16" on light to medium fabrics. (1 1.6mm 1/16”)
120803 Scroll hemmer foot creates a beautiful double fold 1/8" on light to medium fabrics. (2-1/2 3.2 mm 1/8”)
120806 Scroll hemmer foot creates a beautiful double fold 1/4" on light to medium fabrics. (6 1/4”)
PIPING (CORDING) FEET
P69HR-3/16 Hinged piping foot (Right). This foot will attach 3/16" diameter piping to your fabric. (R36069H-3/16”)
P69HR-1/4 Hinged piping foot (Right). This foot will attach 1/4" diameter piping to your fabric. (P69RH-1/4”)
P69HL-1/4 Hinged piping foot (Left). This foot will attach 1/4" diameter piping to your fabric. (P69LH-1/4”)
P36LN Narrow hinged cording foot (Left). (12435HLN)
P36N Narrow hinged cording foot (Right). (12435HN)
MISCELLANEOUS FEET
P363 Narrow split hinged zipper foot. (40322SH)
P58N Narrow hinged presser foot. (142058N)
P35 / 24983 Regular hinged presser foot.
P351 This is the STANDARD double toe foot set installed on most single needle machines at the factory.
And 2 universal foot screws will be sent together with above feet,
Will work:
For ARTISAN: 196R 5550N 8500N ZJ-100
For BROTHER: B705 B707 B715 B716 B735 B737 B738 B745 B755 B757 B758 B767 B781 PQ1300 PQ1500
For COLUMBIA: N430
For CONSEW: 30 98 99 102 103 105 210 217 218 219 220 230 290 310 2230 7360R-1
For CUTLINE: C220
For CUTSEW: 777 787
For FEIYUE: FY8500 FY8700
For GEMSY: 8700
For JUKI: DDL-127 DDL-227 DDL-500 DDL-501 DDL-552 DDL-553 DDL-555 DDL-5550 DDL-5600 DDL-8300 DDL-8500 DDL-8700 DDL-9000 TL98E
For MITSUBISHI: DB-120 DB-121 DB-122 DB-126 DB-130 DB-170 DB-189 DB-199 LS2-130 LS2-150 LS2-180 LS2-190 LS2-1130
For NECCHI: SUPERNOVA JULIA
For RELIABLE: MSK-8800 MSK-8550M MSK-8870M
For REX: RX8500
For RICCAR: RD-102
For SINGER: 31-15 44 95 96 120U 121C 121D 188K 191D 195K 196K 241 251 281 366K 400W 402W 451K 491D 591D 600W 660A 691D 770D 771D 2191 2491D
For SUNSEW: GC1130 GC5550 GC6180 GC8500 GC-B735 GC-C111
For SUNSTAR: KM-123A KM-123B KM-137A KM-137B KM-146BL KM-250
For TACSEW: 5550 T8700
For TAIKO: TK-505 TK-510
For TOYOTA: AD156 AD157 AD338 D146 D147 D347 D348 D1422-42 D2432
For TYPICAL: GC6-1-D3E2 GC6150B GC6150H GC6150M GC6160D3 GC6195M
For UNICORN: LS2-H520 LS2-H530 LS2-H5100 LS2-H5200 LS2-H5300
For YAMATA: FY8500 FY8700
This High-Quality, 25 Piece Presser Foot Set will also fit many Home Sewing Machines that use High-Shank Presser Feet. These High-Shank Presser Feet have a total height of approximately 1-1/4" (32mm). Note that Low-Shank Presser Feet have a total height of approximately 7/8” (22mm). These Feet WILL NOT fit Low-Shank Home Sewing Machines.
