Description:
DIY Electric Skateboard Flywheel Kit
Speicification:
The 15 mm kit allows for maximum torque transfer without belt slippage.
This kit is much stronger than a 12 mm or 9 mm kit which are known to slip and suffer from belts breaking under hard acceleration.
A belt driven electric skateboard is much more efficient than a Hub motor setup due to the torque multiplication of gears. You will go faster and go farther with a belt
driven setup!
Some minor modification to your wheels may be required.
Longboard wheel per the picture is for display purposes only and is not included in the kit.
Note:
1.Please allow 1-3cm error due to manual measurement. Please make sure you do not mind before you bid.
2.The colors may have different as the difference display, please understand.
Package Included:
1 X 36 T Drive Wheel Pulley designed for Flywheel Style Longboard Wheels
1 X 12 T Motor Pulley with 8 mm bore for motor shaft and Four Set Screws for maximum security
1 X Retainerwasher for bolts
1 X 265 mm long belt HTD 5 M
1 X 255 mm long belt HTD 5 M
6 X M6 Allen Head Screws
