Toàn bộ website
Công Tắc Điều Chỉnh Nhiệt Độ Xh-W1209 Dc 12V Bộ Điều Khiển Nhiệt Kế Với Đèn Led Kỹ Thuật Số
Công Tắc Điều Chỉnh Nhiệt Độ Xh-W1209 Dc 12V Bộ Điều Khiển Nhiệt Kế Với Đèn Led Kỹ Thuật Số
Công Tắc Điều Chỉnh Nhiệt Độ Xh-W1209 Dc 12V Bộ Điều Khiển Nhiệt Kế Với Đèn Led Kỹ Thuật Số
Công Tắc Điều Chỉnh Nhiệt Độ Xh-W1209 Dc 12V Bộ Điều Khiển Nhiệt Kế Với Đèn Led Kỹ Thuật Số
Công Tắc Điều Chỉnh Nhiệt Độ Xh-W1209 Dc 12V Bộ Điều Khiển Nhiệt Kế Với Đèn Led Kỹ Thuật Số
Công Tắc Điều Chỉnh Nhiệt Độ Xh-W1209 Dc 12V Bộ Điều Khiển Nhiệt Kế Với Đèn Led Kỹ Thuật Số
Công Tắc Điều Chỉnh Nhiệt Độ Xh-W1209 Dc 12V Bộ Điều Khiển Nhiệt Kế Với Đèn Led Kỹ Thuật Số
Công Tắc Điều Chỉnh Nhiệt Độ Xh-W1209 Dc 12V Bộ Điều Khiển Nhiệt Kế Với Đèn Led Kỹ Thuật Số
Công Tắc Điều Chỉnh Nhiệt Độ Xh-W1209 Dc 12V Bộ Điều Khiển Nhiệt Kế Với Đèn Led Kỹ Thuật Số
Sản phẩm quốc tế
  • Mã sản phẩm: 1383186 (1,160 lượt xem)

Công Tắc Điều Chỉnh Nhiệt Độ Xh-W1209 Dc 12V Bộ Điều Khiển Nhiệt Kế Với Đèn Led Kỹ Thuật Số

72,000đ
  • Màu sắc / Options
    One Size



Chat Zalo (0855063554)

MÔ TẢ SẢN PHẨM



Features:
 
1.100% complete machine chip, wave soldering, stable performance, good consistency
2. Embedded central processor chip (MCU), more intelligent, lower power consumption
3. Power-off settings automatically memory (MCU built-in EEPROM storage unit)
4. The control accuracy of 0.1 degrees Celsius
5. Hysteresis 0.1 from the set, you can control the decimal (0.1-15.0)
 
Technical Parameters:
 
Temperature control range: -50 ~ 110 °
Resolution: -9.9 ~ 99.9 when the other temperature of 0.1 ° 1 °
Temperature measurement accuracy: 0.1 °
Control accuracy: 0.1 °
Hysteresis accuracy: 0.1 °
Refresh rate: 0.5 S
Input power: DC 5V, DC 12V, DC 24V
Measurement input: NTC (10K 0.5%) Waterproof sensor
Output: 1 relay output, capacity = 20A 125VAC, 20A 14VDC
Environmental requirements: -10 ~ 60 ° Humidity 20% -85%
Specifications Size: 48.5 * 40mm
Total power consumption: Quiescent current: ≤ 10MA Pull-in current: ≤ 65MA
 
Usage:
 
- Press the + button to set the desired temperature (press and hold + - to move up and down quickly) Set the temperature of the display. 
- Press SET to confirm the completion of return, then the controller automatically by setting the relay off! The Thermostat output for the 20A relay to meet a variety of high-power load, connect the control circuit, you can supply power to the thermostat, this display shows the ambient temperature
- Indicator: Flashing indicates the cooling or heating start delay. If the indicator is on, it indicates that the relay is closed
- Digital control: display LL sensor is open, please follow the instructions to connect the sensor; display HH is outside the measuring range will force the relay to disconnect the thermostat; display high temperature alarm.
 
Package Included:
 
1 x XH-W1209 Temperature Controller










THÔNG SỐ KỸ THUẬT & CHI TIẾT

Thông tin đang cập nhật


HỎI ĐÁP VỀ SẢN PHẨM

Lưu ý: Đối với sản phẩm quốc tế, thông tin và hình ảnh chi tiết chúng tôi đã liệt kê bên trên, có những sản phẩm nhân viên sẽ không tư vấn chi tiết được, mong quý khách vui lòng thông cảm. khi quý khách đặt hàng sẽ có nhân viên gọi điện lại xác nhận đơn hàng và thanh toán.

Chat Zalo (0855063554)

Vui lòng để đặt câu hỏi, hoặc nếu chưa có tài khoản, bạn có thể đăng ký nhanh.


KHÁCH HÀNG ĐÁNH GIÁ (0 đánh giá)

Vui lòng để bình luận, hoặc nếu chưa có tài khoản, bạn có thể đăng ký nhanh.

Hiện chưa có đánh giá cho sản phẩm, hãy trở thành người đánh giá đầu tiên.

SẢN PHẨM BẠN QUAN TÂM

LÊN ĐẦU TRANG