Features:
Quick Heat: With fast heat-up fast and thermal recovery.
Adjustable Temperature: Set the desired value to meet your welding needs.
New Design: Most recent deal with heat dissipation design, comfortable hand feeling for long-term use, patent tail strap line pressing design is safer for welding.
LCD Display: LCD digital display to show the temperature clearly.
Plug-pull Project Tip: Easy to install and replace the tips, time-saving power and efficient.
Safer & More Stable Performance: The circuit board is double-sided gold plated.
Lightweight and Portable Size: You can start welding anywhere at any time without feeling tired for a long period of operation.
Longer Life with High Quality: Heat-insulated and non-slip silicone handle provides safe and comfortable operation.
Specification:
Color: Black,Red
Voltage: AC220-240V
Power: 80W
Material: Plastic + Stainless Steel + High Temperature Silicone
Display: LCD
Temperature Range: 180~480℃
Temperature stability: ± 10℃
Type of heating: Internal heating
Soldering Iron Size: 19.5cm x 1.6cm
Instruction:
Press the "+" button once to increase 1℃; press and hold it to increase temperature continuously.
Press the "-" button once to reduce 1℃; press and hold it to reduce temperature continuously.
The newly set temperature will be saved after 3 seconds, and iron will keep the temperature for next time powering-on.
When "℉" or "℃" symbol flashes, it means the heating core has not reached the set temperature.
Temperature Correction:
1. After 90 seconds of powering on, put the soldering tip on a thermometer, and a moderate amount of solder on the soldering tip; make the test point and the soldering tip have good contact (recommended soldering iron temperature is 300 ~ 350℃ for correction)
2. When thermometer displays a stable temperature(about 2 ~ 3 seconds), write down the temperature.
3. Move soldering iron away from thermometer; press the "-" and "+" button at the same time to enter temperature correction interface.
4. Input adjustment quantity. Adjustment quantity= set temperature - measured temperature (see example)
5. Press the "-" and "+" at the same time to exit temperature interface, finished.
Example 1, when setting temperature is 320 ℃ while measured temperature is 312 ℃, the correction steps are as follows:
a. Press the "-" and "+" at the same time to enter temperature correction interface.
b. Press the "+" button till the LCD displays 8℃.
c. Press the "-" and "+" at the same time to exit temperature correction interface
Example 2, when setting temperature is 320 ℃ while measured temperature is 330 ℃, the correction steps are as follows:
a. Press the "-" and "+" at the same time to enter temperature correction interface.
b. Press the "-" button till the LCD displays -10℃.
c. Press the "-" and "+" at the same time to exit temperature correction interface
Package Included:
1 x Electric Welding Iron
1 x Power Adapter (According to different countries, we will send corresponding adapter.)
1 x Use Manual
Detail Pictures:
