Toàn bộ website
Ir Cảm Biến Ánh Sáng Mô-Đun Trần Cảm Biến Chuyển Động Ac220V Công Nghệ Cảm Ứng Hồng Ngoại
Ir Cảm Biến Ánh Sáng Mô-Đun Trần Cảm Biến Chuyển Động Ac220V Công Nghệ Cảm Ứng Hồng Ngoại
Ir Cảm Biến Ánh Sáng Mô-Đun Trần Cảm Biến Chuyển Động Ac220V Công Nghệ Cảm Ứng Hồng Ngoại
Ir Cảm Biến Ánh Sáng Mô-Đun Trần Cảm Biến Chuyển Động Ac220V Công Nghệ Cảm Ứng Hồng Ngoại
Ir Cảm Biến Ánh Sáng Mô-Đun Trần Cảm Biến Chuyển Động Ac220V Công Nghệ Cảm Ứng Hồng Ngoại
Sản phẩm quốc tế
  • Mã sản phẩm: 1142514 (916 lượt xem)

Ir Cảm Biến Ánh Sáng Mô-Đun Trần Cảm Biến Chuyển Động Ac220V Công Nghệ Cảm Ứng Hồng Ngoại

85,000đ
  • Màu sắc / Options
    One Size




MÔ TẢ SẢN PHẨM



Specifications:
Sensing Mode:PIR Sensing + Light Control
Rated Voltage:220V 50HZ
Output Way:Controllable Silicon
Load Power:Filament lamp ≤100W,Electricity saving lamp ≤30W, LED≤18W
Delay:20s (People are moving within the sensing range, the switch will auto delay and keep connecting;if people stay still,switch will stop responsing)
Sensing Distance:3-6M (High temperature will influence switch sensibility)
Sensing Angle:110°
Sensitivity To Light:Darkness

Features:
*Adaptive to filament, electricity saving lamp
*This lamp is internal equipped with auto body sensor.If people come the lamp will power on;if people leave,the lamp will power off.
*Inner body auto sensor adopts infrared heat releasing device,and it can accurately capture moving low frequency signal and automatically power on.
*When people leave,the lamp will auto delay power off,convenient and energy saving.
*Inner side of the lap is set up with auto ambient brightness detecting circuit.
*Only when ambient brightness is lower than setting value,the sensor will receive sense and let the lamp power off.
*And it is energy saving

Notice:
-When installing,please disconnect the power to guarantee safety
-Don't apply it to overpower current or voltage
-Don't install it accessible to water
-Detection distance will change according to ambient temperature's difference.In summer,detection distance is short(It is obvious when close to human body's temperature);in winter, detection distance will be far
-Don't install it in lower than -20 Celsius or higher than 60 Celsius
-Don't expose it to sun
-Don't install it in which there are moving objects
-The first time power on ,there will one minute initiation;during this period,the device will shine,it is normal phenomenon
-In coast zone,thermal flow will trigger the sensor because of ocean current.If installing filament lamp which emits great heat,please keep far away from the sensor(at least 1m)

Package Included:
1 X PIR Switch Sensor














THÔNG SỐ KỸ THUẬT & CHI TIẾT

Thông tin đang cập nhật


HỎI ĐÁP VỀ SẢN PHẨM

Lưu ý: Đối với sản phẩm quốc tế, thông tin và hình ảnh chi tiết chúng tôi đã liệt kê bên trên, có những sản phẩm nhân viên sẽ không tư vấn chi tiết được, mong quý khách vui lòng thông cảm. khi quý khách đặt hàng sẽ có nhân viên gọi điện lại xác nhận đơn hàng và thanh toán.

Vui lòng để đặt câu hỏi, hoặc nếu chưa có tài khoản, bạn có thể đăng ký nhanh.


KHÁCH HÀNG ĐÁNH GIÁ (0 đánh giá)

Vui lòng để bình luận, hoặc nếu chưa có tài khoản, bạn có thể đăng ký nhanh.

Hiện chưa có đánh giá cho sản phẩm, hãy trở thành người đánh giá đầu tiên.

SẢN PHẨM BẠN QUAN TÂM

LÊN ĐẦU TRANG