1. POWER Pushbutton - Press and release to switch the unit ON and resume hunting with the same settings and modifications used prior to turning the unit OFF.
2. Sensitivity - The MD-6300 has eight Sensitivity setting for more precise depth and target detection.
3. Mode - Indicated which of the three detection modes are selected by highlighting the corresponding word on the LCD screen.
4. Target ID Legend - A printed Target ID Legend is located directly above the LCD screen and indicates commonly found targets and metals. When a target is detected, the Target ID cursor will appear below the word that most likely indicates the type of target found, based on its conductivity.
5. Upper Scale - The Upper Scale, where the Target ID cursor is illuminated when a target is detected, consists of five graphical segments.
6. Target ID Cursor - The Target ID cursor is illuminated in the Upper Scale and indicates the probable identity of detecting a target.
7. Lower Scale - The lower horizontal scale, or Notch Discrimination Scale, indicates the discrimination pattern where the detector will or will not produce an audible signal when a target is located. This scale changes when switching between Detection Modes.
8. Coin Depth - The depth of a coin, or similar sized target, will be shown on the LCD screen.
9. Low Battery Indicator - When the unit's batteries become weak, the Low Battery Indicator will remain on.
10. Headphone Jack
11. Tone ID - The Tone ID feature produces distinct audible tones based on a target's conductivity.
