Model Options | |||
MHS-5200A | |||
Sine Wave | 0~25MHz | ||
Square Wave | 0~6MHz | ||
Triangle Wave | 0~6MHz | ||
Other Waveform | 0~6MHz | ||
Frequency characteristics | |||
The minimum frequency resolution | 0.01Hz | ||
Frequency error | ±5×10-6 | ||
Frequency stability | ±1×10-6/5å°æ—¶ | ||
Output Impedance | 50Ω±10% | ||
Amplitude characteristics | |||
Amplitude range (peak to peak) | 5mVp-p~20Vp-p; | ||
Amplitude | 1mVp-p | ||
Amplitude stability | ±0.5% (3 Hours) | ||
Amplitude error | ± 1%+10mV | ||
Offset Range | -120% | ||
Bias resolution | 1% | ||
Phase range | 0 | ||
Phase resolution | 1° | ||
Waveform characteristics | |||
Output waveform types | Sine, square, pulse, triangle, ramp, TTL / CMOS digital signal wave, wave signal noise, half-wave signal, full-wave signal, the index rose waveform signal index down waveform signal, multiple audio signals, pulse Sinclair a variety of custom arbitrary waveform signal wave signal, Lorentz pulse signals, DC signals. | ||
Output modulation | Frequency sweep, the amplitude of the scan, the scanning duty cycle, burst | ||
Wave length | 2048 points | ||
Sample Rate | 200MSa/s | ||
Waveform amplitude resolution | 12 bits |
Sine wave | Harmonic contact system | 40dBc(<1MHz) ,35dBc(1MHz~25MHz) |
Distortion | <0.8%(20Hz~20KHz) |
Square wave | Lift along the time | ≤20ns |
Overshoot | ≤5% | |
Duty cycle adjustment range | 0.1%~99.9% | |
TTL signal | Output Level | >3Vpp |
Fan-out factor | >20TTL load | |
Lift along the time | ≤20ns | |
CMOS signal | LOW | <0.3V |
High | 1V~10V | |
Lift along the time | ≤20ns | |
Sawtooth | Duty cycle> 50% | L sawtooth |
Duty cycle <50% | Sawtooth down | |
Arbitrary Waveform | Quantity | 16 group |
Memory depth / group | 1KB/16 group | |
Scan | Scan Mode | Scanning frequency, the amplitude of the scan, the scanning duty cycle |
Scan time | 1S | |
Scan range | It is decided by the value stored in the position of CH1 M1 and CH2 | |
Memory | Number of storage space | 16 |
Storage location | M0~M15 |
An external input signal measurements | |
Frequency range | GATE-TIME=10S 0.1HZ - 60MHZ GATE-TIME=1S 1HZ - 60MHZ GATE-TIME=0.1S 10HZ - 60MHZ GATE-TIME=0.01S 100HZ - 60MHZ |
Minimum input voltage | 0.5Vp-p |
The maximum allowable input voltage | 20Vp-p |
Counting range | 0~4294967295 |
Counting | Manually |
Positive and negative pulse width measurement | 10ns resolution, the maximum measurable 10s |
Periodic measurements | 20ns resolution, the maximum measurable 20s |
Duty cycle measurements | 0.1% resolution, measuring range from 0.1% to 99.9% |
Source Selection | 1.Ext.IN input (analog), 2.TTL_IN input (digital signal) |
Communication features | |
Interface | It uses USB to serial interface |
Communication speed | 57600bps |
Protocol | Using the command line, open protocols |
Other | |
Power supply | DC5V±0.5V |
Size | 19.5 * 17.5 * 7cm / 7.67 * 6.9 * 2.75in |
Weight | 542g / 19.12oz |
Package Size | 25 * 21 * 9.5cm / 9.84 * 8.27 * 3.74in (L * W * H) |
Package Weight | 950g / 33.23oz |
Thông tin đang cập nhật
Vui lòng đăng nhập để đặt câu hỏi, hoặc nếu chưa có tài khoản, bạn có thể đăng ký nhanh.