Toàn bộ website
Máy Khắc Laser A3X-2500Mw Máy In Laser Cnc Eleksmaker Elekslaser
Máy Khắc Laser A3X-2500Mw Máy In Laser Cnc Eleksmaker Elekslaser
Máy Khắc Laser A3X-2500Mw Máy In Laser Cnc Eleksmaker Elekslaser
Máy Khắc Laser A3X-2500Mw Máy In Laser Cnc Eleksmaker Elekslaser
Máy Khắc Laser A3X-2500Mw Máy In Laser Cnc Eleksmaker Elekslaser
Máy Khắc Laser A3X-2500Mw Máy In Laser Cnc Eleksmaker Elekslaser
Máy Khắc Laser A3X-2500Mw Máy In Laser Cnc Eleksmaker Elekslaser
Máy Khắc Laser A3X-2500Mw Máy In Laser Cnc Eleksmaker Elekslaser
Máy Khắc Laser A3X-2500Mw Máy In Laser Cnc Eleksmaker Elekslaser
Sản phẩm quốc tế
  • Mã sản phẩm: 1174940 (1,128 lượt xem)

Máy Khắc Laser A3X-2500Mw Máy In Laser Cnc Eleksmaker Elekslaser

7,651,000đ
  • Màu sắc / Options
    One Size




MÔ TẢ SẢN PHẨM



Description:
1. This EleksLaser A3X-2500mw Laser Engraving Machine is the Upgraded version of Elekslaser-A3 Pro 2500mw.
2. More beautiful and easier to assemble than Elekslaser-A3 Pro 2500mw.
3. Support CNC engraving method if adding a Z Axis support. Z Axis support link is here:1177750.


Specifications:
BrandEleksMaker
ModelEleksLaser A3X-2500mw
Control BoardEleksMana SE
Communication PortMircoUSB
Laser Quick ReplaceSupport
Stepper Motor42H34S-1304A
Power InputAC100-240V
Sysytem SupportWin XP/7/8/10
Engrave ModePhoto, Word, Scan, outline, Pixel Laser Engraving
Supported Formatsjpg, bmp, svg, G-code
MaterialAcrylic+Aluminum
Working VoltageDC 12V
Working CurrentDC 2.5A
Laser Power2.5W / 2500mW
Control Software SystemCandle, EleksCam, T2-Laser, Benbox, GrblController, LiteFire, Laser GRBL, etc.
Engraving Accuracy0.01mm
Engraving Area30x40cm / 11.81 x 15.75inch (maximum)
Engraved object height limitatiion                 No Limitation
Packaging Size58x40x14cm / 22.83x15.75x5.51inch (L*W*H)
Assembled Product Size60x46x18cm / 23.62x18.11x7.09inch (L*W*H)
Package Weight5kg
Can EngraveWood, Plastic, Paper, Bamboo, Ox Horn, Leather, Sponge Paper, etc.
Can not engraveMetal, Stone, Ceramics, Glass, Reflective or Transparent Material
CertificationCE, FCC, FDA(Please contact us if you need them)
Functionideal for amateur laser engraving usage low-light positioning and freedom positioning functions.
Features30X40cm ultra large engraving area,gantry shape design, no engraving height limitation.
Three stepper motor drive providing faster moving speed.
2500mW violet laser module with heatsink, high laser engraving power and long-term available.
can print any pictures easily


Tips:
You can know more about installation, software , operation and normal questions through this wiki link: Click here
Laser Self-checking tips link: Click here

Note(Please pay attention):
1. Please wear laser goggles during usage and avoid touching the laser directly with your eyes and skin!
2. The red cord is DC12v(+),black cord is GND(-), yellow cord is signal(S). Please make sure you know the wire position and connect
     to the ManaSE board correctly!

3. The warranty period of laser module is one month. If you have any quality problem(Except individual situation like using the laser
    module more than 30 minutes per time and casue the damage ), please feel free to ask our customer service for a help.
4. If your laser module has any problem, please DO NOT dismantle it without our permission. It will destroy the laser module.

5.  If you have any quality problem about the machine, please feel free to contact us. Many operative problem can be solved according
    to your video and problem description. Thank you in advance.

Package List:
1 Set x 2500mW A3X Laser Engraver Kit(Need to be assembled by you)




What our customers do with EleksLaser:



















 

 
 
 







FAQ:

FAQ:
1. How to assemble the kit?
    The whole assemble and operating manual link is here:Click here

2. What software can support this machine? And what image format? Engrave Mode?
    Supported Software: EleksCam,T2-Laser, Benbox, GrblController, LiteFire, Laser GRBL, etc.
    Supported Image Format: jpg, bmp, svg, G-code
    Supported Engrave Mode: Photo, Word, Scan, Outline, Pixel Laser Engraving


3. What system can the EleksCAM support?
    PC Win XP 7/8/10 , Laptop is ok,too.

4. My laser doesn't work, what should I do?
    If the machine does not work, it might because:
â‘  The wire connection is wrong.Please check the connection like the picture shown.
â‘¡ Your computer could not support the software.Please use Win XP 7/8/10 to check it.
â‘¢ Software problem.Please check whether wires are inserted rightly. And then check your data setting.
â‘£ The kit misses some accessories.Please compare with the instruction and tell us, we will solve it once you send us the email.

⑤ Laser module/ driver board/power supply is broken.Please check which part is the main problem,and then send us a video to prove it.
    Or you can send us a video about your software setting,working laser and driver board. We will analyze it and give you a solution.

â‘¥ Laser module self-checking tips link is here: Click here

5: My software shows: Not data, what should I do?
    There might be two reasons.
     â‘  You did not open  Administrator privileges to run the software. Please try this.
     â‘¡ Your computer architecture is incomplete:check whether VC ++ and. Net and directX are installed, and have to turn off the virus.


6. Can I regulate the laser power or the laser power is adjustable?
     Our new Mana SE controller board can adjust the power. Please download our ElekesCAM software and firmware to do it.Or benbox software and benbox firmware.
     Please note that two firmware is not the same. Details are shown in the EleksCAM & Benbox software instruction above.

7. Can I upgrade stronger power laser module by myself? Can I extent rail frame?
   Yes,you can.DC12V laser module can be installled on this machine. The red is positive.You can also extent the frame by yourself,
   but we do not provide rails. Please note that.
 
8. When I click arrows to control the motors, it works. But when I begin to make it work with EleksCAM software,
    it does not move. What should I do?

    The EleksCAM could move by hand but could not move when focus.The probelm is the area and language inside the system control panel.
    Please set the format to English and United States.Then it will be ok. Detail is shown in the wiki link above.

9. My laser module is always on and could not turn off.What should I do?
    Please try to connect the Signal(S) and GND(-).
    If the laser module turn off, that means the laser module is ok, the problem might be the ManaSE board or software setting. 
    If the laser module is still on, that means the laser module might be damaged.
    You can check as the video shown: Click here

10. If my laser is broken and I might find the reason(Or I could not find) . What should I do?
      â‘  Find the reason: Take a video to prove the part is broken and then send it to us. we will give you a solution according to your video.
      â‘¡ Could not find the reason : Check the Question 4 first. If the problem could not be solved, please feel free to contact our customer
          service with a video: cservice@banggood.com. The video should contain software setting, broken part details and the power-on machine.
          We will solve it asap.

THÔNG SỐ KỸ THUẬT & CHI TIẾT

Thông tin đang cập nhật


HỎI ĐÁP VỀ SẢN PHẨM

Lưu ý: Đối với sản phẩm quốc tế, thông tin và hình ảnh chi tiết chúng tôi đã liệt kê bên trên, có những sản phẩm nhân viên sẽ không tư vấn chi tiết được, mong quý khách vui lòng thông cảm. khi quý khách đặt hàng sẽ có nhân viên gọi điện lại xác nhận đơn hàng và thanh toán.

Vui lòng để đặt câu hỏi, hoặc nếu chưa có tài khoản, bạn có thể đăng ký nhanh.


KHÁCH HÀNG ĐÁNH GIÁ (0 đánh giá)

Vui lòng để bình luận, hoặc nếu chưa có tài khoản, bạn có thể đăng ký nhanh.

Hiện chưa có đánh giá cho sản phẩm, hãy trở thành người đánh giá đầu tiên.

SẢN PHẨM BẠN QUAN TÂM

LÊN ĐẦU TRANG