Toàn bộ website
Máy Khắc Laser Xanh Diy Eleksmaker El01-2500 445Nm 2500Mw
Máy Khắc Laser Xanh Diy Eleksmaker El01-2500 445Nm 2500Mw
Máy Khắc Laser Xanh Diy Eleksmaker El01-2500 445Nm 2500Mw
Máy Khắc Laser Xanh Diy Eleksmaker El01-2500 445Nm 2500Mw
Máy Khắc Laser Xanh Diy Eleksmaker El01-2500 445Nm 2500Mw
Máy Khắc Laser Xanh Diy Eleksmaker El01-2500 445Nm 2500Mw
Máy Khắc Laser Xanh Diy Eleksmaker El01-2500 445Nm 2500Mw
Máy Khắc Laser Xanh Diy Eleksmaker El01-2500 445Nm 2500Mw
Máy Khắc Laser Xanh Diy Eleksmaker El01-2500 445Nm 2500Mw
Sản phẩm quốc tế
  • Mã sản phẩm: 1179592 (1,715 lượt xem)

Máy Khắc Laser Xanh Diy Eleksmaker El01-2500 445Nm 2500Mw

2,878,000đ
  • Màu sắc / Options
    One Size




MÔ TẢ SẢN PHẨM



Specification:
BrandEleksMaker
ModelEL01-2500
Heatsink MaterialAircraft Aluminum
Aircraft Aluminum2500mW
Wavelength445nm (Blue Laser)
Supply VoltageDC 12V
Beam ShapeDot (Focusable)
Input InterfaceXH2.54-3P
Section Size33mm x 33mm
Life Time>10,000 hours

Features:
- EleksMaker® EL01-2500 laser module, exquisite workmanship and delicate blue appearance.
- 445nm 2500mW focusable blue laser module, with PWM function, can control the laser power.
- Blue plating aircraft aluminum heatsink with cooling fan ensure long working time continuously.
- Equipped with constant-current driver board ensure stable output optical power, low heat no external driver board needed, easy to use.
- XH2.54-3P 3 pins plug, PWM modulation, suitable for laser engraving machine equipment usage.

* There is a button on the driver board which control ON/OFF of weaklight mode.
- Press it, the module turns to weaklight mode, then the laser light emitting becomes weak and won't work on material. At this time, it can used for positioning as preparation before engraving.
- Press it again, it turns back to normal engraving mode, the laser light is powerful to work on material.


Applications:
- Can Cut & Engrave: 3mm Basswood, Dark Color KT Board, 300gsm Paperboard, 250gsm Kraft Paper, Non-woven Fabrics, Leather, Plastic (More material need to be tested.)
- Can Engrave: High Density Soild Wood, MDF, PCB, Paper, Bamboo, Stone, Arcylic(blacken engraving area with marker)
- Can Not Engrave: Stainless Steel, Stone, Ceramics, Glass, Reflective or Transparent Material.

Notice:
1. Please wear laser goggles during usage, avoid to touch the laser directly to the eyes and skin! Keep away from children and pets.
2. Usually used for EleksMaker® laser engraving machine, 3 pins connector cable is needed to connect to the EleksMaker board. This item comes with the cable, and the cable from your A3 machine is also suitable.
3. Note that the laser module works less than half an hour in one time, and please wait until it has cooled down before continuing the work.
4. The warranty period of laser module is one month. If you have any quality problem (Except individual situation like using the laser module more than 30 minute one time and casue the damage), please feel free to ask our customer service for a help. Thanks for your understanding. 

Package Included:
1 x 2500mW Blue Laser Module
1 x DC 5.5mm to XH2.54-3P Adapter
1 x 3-Pin XH2.54-3P Connector Wire

How to test EleksMaker® EL01-2500 laser module qualified or not?
,,,

THÔNG SỐ KỸ THUẬT & CHI TIẾT

Thông tin đang cập nhật


HỎI ĐÁP VỀ SẢN PHẨM

Lưu ý: Đối với sản phẩm quốc tế, thông tin và hình ảnh chi tiết chúng tôi đã liệt kê bên trên, có những sản phẩm nhân viên sẽ không tư vấn chi tiết được, mong quý khách vui lòng thông cảm. khi quý khách đặt hàng sẽ có nhân viên gọi điện lại xác nhận đơn hàng và thanh toán.

Vui lòng để đặt câu hỏi, hoặc nếu chưa có tài khoản, bạn có thể đăng ký nhanh.


KHÁCH HÀNG ĐÁNH GIÁ (0 đánh giá)

Vui lòng để bình luận, hoặc nếu chưa có tài khoản, bạn có thể đăng ký nhanh.

Hiện chưa có đánh giá cho sản phẩm, hãy trở thành người đánh giá đầu tiên.

SẢN PHẨM BẠN QUAN TÂM

LÊN ĐẦU TRANG