1 X 3 in 1 USB6 X Optional Bits with 6 Sanding BandPolishing Operation:
1. Choose the suitable drill and fully inserted to drill bits hole of the handpiece.
2 .Connect handpiece wire to Handpiece interface.
3. Turning the speed control knob with clockwise, power is turned after hear sound of "pop”.
4. Move the shift switch to FWD or REV station, turning the speed and direction from the handpiece.
5. After finished working,turning the speed control knob with anticlockwise until hear “pop” to turn off power.
Maintenance:
1. Frequently clean the body with soft cloth,do not use cleaning solvents or detergents.
2. Power Bank keep 25-60% rates capacity when you do not use for a long time (approx change once a month).
3. Do not hit and extrusion control box and handpiece.
4. Do not disassemble control box and handpiece.
Safety:
1. Avoid sunlight and high temperature environment,away from fire and heat source.
2. Products should be placed in the shade and dry place,avoid contact with corrosive substances,
keep it away from children.
3. For security avoid using during charging.
4. The charge adaptor match 13V,1.5A Max,otherwise will reduce battery life,burn out circuit board,
cause fire,etc
5. Please stop using if you met abnormal phenomenon,battery bulge,battery and obvious heat.
Note:
1. The real color of the item may be slightly different from the pictures shown on website
caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight deviation for the measurement data.
3. It is a rechargeable polisher,you can use it after charge it.