Description:EleksMaker IVAxis 4 Axis Stepper Motor Driver Laser Controller Board DIY CNC Engraver DC12V, Perfect for DIY Your Customized Amateur Engraver.
Specification:| General Specification |
| Brand | EleksMaker® |
| Model | IVAxis |
| Product Name | 4 Axis Control Board |
| Product Size | 90mm*70mm*20mm |
| Product Weight | 120g |
| Technical Parameters |
| Interface Port | Micro USB |
| Supply Voltage | DC12V-5A |
| Operating System | Windows 7/8/10 |
| Software Support | CNCUSB |
| Support Axis | 4 Axis |
| Support Stepper Motor | Motor within 2A 2-phase 4-wire |
| Power Interface | DC5.5 - 2.1 (Inside is positive electrodes and ouside is negative electrodes) |
Features:
1. NEW IVAxis v5.3 comes with the mounting holder, make it more easier to be installed on your machine.
2. Expansion of functions: Limit, subdivision, stop, hand control, the fan, low light, external relay
3. Fit for DIY desktop laser engraver,dispensing machines printer,plotter,tool CNC.
4. 4-axis linkage, Y-axis dual interface, can drive a stepper motor within 2A 2-phase 4-wire
5. MINI USB interfaces, 12V power supply, delivery lines! Send software! Technical support!
6. Large MOS tube,onboard DC buck module, wire jump ADJ can adjust manually the laser voltage to control the laser power
Instruction (IMPORTANT):
1. Download and install the
special software:
CNCUSB Setup & Driver:
CLICK HERE2. Plug in DC12V power supply, connect the board to computer, open CNCUSB software. Then it will pop up a "License Activation" window, which shows a "Activation Code" and a "Serial", please send this code and serial number to BG Service to ask for the exclusive "Registration Key": cservice@banggood.com. Thanks for understanding
(Every signle control board has its exclusive keys. (For example: MUKY-SEEA-ASDF-QWRE Serial: 055666)
3. Enter your registration key, then License Activated Successfully.
(Any questions about the above operations, please
CLICK HERE for further)
Note:
1. This control board can only be used with CNCUSB software, need to register firstly, please contact the seller for registration.
2. Please do not connect the power supply above 12V, outside is negative and inside is positive, it is recommended to use 5A or higher power supply!
3. If you feel the motor torque is small, please adjust the potentiometer on the motor driver, don't make it too high, otherwise the motor will be hot!
Package Included:
1 x IVAxis 4 Axis Controller Board w/ Mounting Holder
1 x USB Cable
5 x Connector Wire
.jpg)
.jpg)
