Auto / Normal / Single trig modes
Rising / Falling edge trigger
External trig available
Trigger output is available, which makes it possible to cascade scopes to do multi-channel capture.
Trigger level adjustable with indicator
Hold / run feature
Save / recall up to 6 captures
FFT function available - size of 256 points and 512 points selectable, sampling rate of 1Ksps to 2Msps selectable
Transfer screen to PC as bitmap file via serial connection
Built-in 500Hz / 5Vpp test signal
Frequency Meter (For TTL level input signal)
Auto switching between Oscilloscope Mode and Frequency Meter Mode
9V DC power supply
Specification:Maximum equivalent-time sampling rate (repetitive signal): - 20MSa / s
Maximum real-time sampling rate: - 2MSa / s
Resolution: - 8 bits
Record length: - 256 bytes
Analog bandwidth: - 1MHz
Vertical sensitivity: - 100mV / Div - 5V / Div
Vertical position adjustable with indicator
Input impedance: - 1M ohm
Max input voltage: - 50Vpk (1x probe) [500Vpk for 10x probe]
DC / AC / GND coupling
Horizontal: - 0.5us / Div - 10m (minute) / Div
Dimension: 110mm X 65mm X 25mm (without case)