Description:1. The only all similar products you can use the phone on the map to see the locations and the PC platform position trajectory queries, can also be directly SMS reply locations.
2. On the basis of the original base station location above joined Google map location, so that the error from the product significantly reduced.
3. Due to join the Google positioning mode, the product now supports an overseas location tracking capabilities.
4. This product does not require internet fee, free for life. Simply send a text message to the alarm locator, you can reply address information and Google Maps connection, the entire phone is simple to operate, in one step.
5. This product is built two strong magnets, eliminating the need to worry that you put the question, as long as there is metal in place, you can put up, the magnets will automatically adsorption up, you install more convenient placement.
6. This product is a function with automatic start charging, which is connected to the power supply, when the alarm locator power exhausted, after the product off, calls the product will automatically boot and continues to charge, warning, charge must insert the SIM card.
7. Visit the Web site http; // gpsui.net. Whether in the car alarm locator, children bag, the elderly pocket, valuables bag, can be sent via cell phone to alarm locator SMS command, query the location of alarm locator, allowing you to monitor the entire process, real-time control target s position.
Specification:| Dimensions | 3.5cm * 2.0cm * 1.4cm (L * W * H) |
| The charging input | Input AC110-220V50 / 60Hz |
| Charging output | OutputDC5.0V 300-500mA |
| Machine Battery | 3.7V 400mAh Li-ion battery |
| Standby time: 12 days | Working time 4-6 days |
| Expansion card | Mini TF card |
| The recorded video | 320 * 240 |
| The photo size | 640 * 480 |
| Continuous call | 150-180 minutes |
| Network standard | GSM / GPRS |
| Storage Temperature | -40 ° C to + 85 ° C |
| Operating temperature | -20 ° C to + 55 ° C |
| Relative humidity range | 5% - 95% non-condensing |
| GPRS | Upload60, TCP / IP |
| The working voltage | 3.4-4.2V DC |
| Standby Current | ≈2.5mA |
| Open voice currents | ≈30mA |
| Call current | ≈150mA |
| GSM positioning time | 25 seconds |
| Parameters | GSM850 / 900/1800 / 1900MHZ |
| Support Country | United Kingdom France Germany Netherlands China Italy, Spain and Portugal Brazil, Denmark and Russia Poland, Turkey and Hungary Thailand, Greece and Indonesia, Malaysia, Vietnam, Myanmar, Pakistan and Iraq, Saudi Arab and American Kazakhstan Mongolia Dubai,ect. |
Instructions:
1. Prepare: a SIM phone card and a mini memory card;
2. Boot: Open the card cover in the direction indicated SIM card is inserted in the mini memory card is inserted, the product will automatically turn the red light flashes four times off, 30 seconds after entering the normal standby state. [Note that if you do not read the memory card is re-inserted under];
3. Indicator: Power indicator light goes out four times, low battery indicator flash;
4. Binding master number; send to the alarm locator edit the text using a mobile phone number 000, later in this machine a text message reply to the phone; Set; bindings + master number;
5. A separate recording; alarm locator number sent to edit the text using a mobile phone 555, later in this machine a text message reply to the phone; [Snd; recording has begun];
6. Voice Callback; edited using a mobile phone to send text messages to the alarm locator number 666, later in this machine a text message reply to the phone; [DT; has successfully set sound monitoring, alarm call-back];
When the alarm locator ambient sound greater than 40 decibels of sound, alarm locator will automatically call the preset phone number;
7.GPRS location query: send 777 to edit the text using a mobile phone alarm locator number, later a Chinese native reply phones location and the Google Maps link, there will be the location address map and text description of the phone to open this link, make more accurate;
8. Product ambient sound check: direct dial alarm locator card number, can open up after a few seconds to hear the sound around the alarm locator (query alarm locator itself does not emit any sound and light);
9. Positioning trajectory queries; send to the alarm locator number 102 edit the text using a mobile phone, a mobile phone later on this machine reply [account number, password], visit the Web site http; // gpsui.net;
10. Location constantly tracking; computer platform can operate;
11. Delete the contents of the memory card; send to the alarm locator number 445 edit the text using a mobile phone, a mobile phone later on this machine reply [TF, cleanup is successful, the current may have the capacity];
12. The host status; edited using a mobile phone to send text messages to the alarm locator number 888, later in this machine a text message reply to the phone; [master all the functions on or off the battery capacity to bind number, signal strength, power frequency, GPRS TF card capacity, etc.];
13. Restart the host; alarm locator number sent to edit the text using a mobile phone 999, and so one minute recovery success;
14. Close, information above all remaining power display stop function; send to the alarm locator number 444 edit the text using a mobile phone, a mobile phone later this machine reply, [Reset; all tasks have been canceled];
15. The power to check: every time you locate information in reply to have power.
Package Included:
1 X GPS Tracker
.jpg)
