Features: Made of engineering plastics, high temperature resistance.
Enhanced control during sanding and grinding applications.
Platform offers stability during edge sanding and sharpening.
Adjustable depth control for a precise finish.
The guide has a 90 and 45 degree bevel for various sanding applications.
Installation Instructions:
Step 1: Remove the housing cap A from the end of the tool and set housing cap aside. The original housing cap must be reinstalled when
this attachment is not used (Fig. 1).
Step 2 & 3: Loosen the collet nut and place your accessory in and tighten. Note: The attachment is for ½” diameter accessories or smaller.
When inserting a bit into your Dremel Rotary Tool be sure that the bit is securely inserted into the collet. Always use the wrench to tighen the collet nut to prevent the bit from loosening within the collet.
Do not use the Dremel Chuck.
Step 4: Thread the attachment B onto the threaded portion of the housing collar C (Fig. 2).
Step 5: Adjust the attachment B to the desired depth by loosening the wing knob D (Fig. 3).
Please note that Router bits are not allowed to use with the Sanding/GrindingGuide attachment.
Usage:
45 Degree
90 Degree
Package Included: 1 x Sanding Grinding Guide
More Details:
THÔNG SỐ KỸ THUẬT & CHI TIẾT
Thông tin đang cập nhật
HỎI ĐÁP VỀ SẢN PHẨM
Lưu ý: Đối với sản phẩm quốc tế, thông tin và hình ảnh chi tiết chúng tôi đã liệt kê bên trên, có những sản phẩm nhân viên sẽ không tư vấn chi tiết được, mong quý khách vui lòng thông cảm. khi quý khách đặt hàng sẽ có nhân viên gọi điện lại xác nhận đơn hàng và thanh toán.
Vui lòng đăng nhập để đặt câu hỏi, hoặc nếu chưa có tài khoản, bạn có thể đăng ký nhanh.