Power supply | 2 x 1.5V AA batteries (not included) |
Dimension | Approx. 10x13x3.5cm/ 3.94x5.12x1.38" |
Probe diameter | Approx. 2.9cm/ 1.14" |
Working frequency | 2.0 MHz ± 10% |
Ultrasonic output power | Iob≤10 mW/cm2 |
Overall sensitivity | ≥90 dB (Integrated sensitivity 200mm away from the the surface of the probe)While measuring integrated sensitivity, using the doppler frequency (300 ± 50) Hz |
Reflecting target speed: | 10cm /s ~ 40cm /s |
FHR measuring range | No narrower than 50bpm-240bpm (± 2bpm). (Beat Per Minute) |
FHR accuracy | ±2 BPM |
Spatial-peak temp-peak acoustic pressure | ≤0.1 MPa. |
Negative peak sound Pressure | (p_)<1Mpa |
Output beam intensity | (Iob)<20mW/cm2 |
Spatial-peak temporal-average derived intensity | (Ispta)<100mW/cm2 |
Continuous working time | ≥5h (Low battery capacity or large volume may reduce working hours) |
Coupling gel acoustic impedance | 1.5 - 1.6 (105g/cm2.s) |
Audio output power | ≤1.0W |
Working environment Temperature | +5℃ ~ +40℃ Humidity: ≤ 80% |
Atmospheric pressure | 86kPa ~ 106kPa |
Transport and storage environment Temperature | -10 ℃ ~+40℃ Humidity: ≤ 80% |
Atmospheric pressure | 86kPa ~ 106kPa, well-ventilated room without corrosive gases. |
Thông tin đang cập nhật
Vui lòng đăng nhập để đặt câu hỏi, hoặc nếu chưa có tài khoản, bạn có thể đăng ký nhanh.