Module Aio Vtx Và Esc Flytower 4In1 Exuav Flytower F4 Pro V2 Osd Fc Aio 48Ch 25/200/600Mw Vtx & 35A Bl_S Dshot600 Cho Máy Bay Điều Khiển 30.5X30.5Mm

30.5x30.5mm EXUAV Flytower F4 Pro V2 OSD FC AIO 48CH 25/200/600mW VTX & 35A BL_S ESC 
















Specification:
Brand Name: EXUAV
Item Name: F4 Flight Controller AIO VTX Module & ESC Flytower
Mounting Hole: 30.5x30.5mm
Net Weight: 20.2g 
                    25.3g ( with Standoffs and Screws)
Flytower Installing Height: 14mm

Flight Controller AIO VTX  ( Top Level)	Flight Controller Item Name: EXUAV F4 Pro Flight Controller Firmware:Betaflight (Up to V3.2.4 EXUAVF4-PRO) OSD:  Betaflight OSD MCU: STM32F405  MPU: MPU6000 - Micro USB Connector - Support DSMX/ SBUS Receiver Built-in FPV Transmitter Module CH: 48CH Power: 25mW/ 200mW/ 600mW Switchable Antenna connector: MMCX-RP-SMA - Support IRC Tramp  Size: 36x36mm Mounting Hole: 30.5x30.5mm Weight: 11.4g
35A BLheli_S 4In1 ESC ( Bottom Level)	Con. Current: 35A  Peak Current: 50A ( 15S)  Firmware: BLHeli_S G_H_30 Input Voltage: 2-5S Lipo Size: 38x38mm ( include pad ) Weight: 8.8g - Support Oneshot42/ Oneshot125/ DShot150/ DShot300/ DShot600

Port Setting:
1. F4 Setting:


2. ESC Setting:



VTX Setting:



1. Press VTX Button for 3S untill Blue light flashing, then press button for 1S, will change the frequency.
2. While blue light flashing, continus pressing button 3 Sencond, Green light flashing, then change the CH. 
3. While Green light flashing, press button 3 Second, Red light will flash. Then
    short press to change Power. ( Red light flash 1 time, 25mW ; 2 times, 200mW; 3 times, 600mW)
4. Save setting automatically when you don't have any operation via vtx button within 5 senconds

Package Included:
1x F4 Pro V2 FC AIO VTX Module
1x 35A BLheli_S 4In1 ESC