Description:
NL-308 Adjustable 100W High Temp Heater Thermostat Hot Melt Glue Gun Adhesive Repair Tool
Specification:
Model: NL-308
Glue stick diameter: 10.8-11.8mm
Working voltage: AC110~240V
Operating temperature: 180~240℃
Temperature working temperature: 140~240℃
Power: 100W
Nozzle diameter: 2.0~2.3mm
Extrusion-melt Adhesive per minute weight: 9~15 grams
Instructions:
1. to ensure a safe working environment, the work area clear of debris.
2. Make sure the surface you want to clean the glue, so as not to affect the bonding effect.
3. the use of hot melt glue gun fashion bracket, nozzle down on the smooth surface.
4. will melt into the plastic strip from the insertion opening, pushing to the chamber. (Using 10.8mm-11.3mm tape)
5. power is preheated for 3-5 minutes, or until completely melted strip.
6. just tap the trigger, let Sol natural flow, excessive force may damage the hot melt glue gun.
7. the work is completed, do not pull out from the mouth into the plastic strip, hot melt can cause severe burns or damage to the hot melt glue gun. The next time use, plug in the power preheating can be used normally 5-8 minutes.
8. When you are finished using the glue gun after, let it cool and then store it.
Precautions:
1. Hot melt glue gun use should be checked before the voltage is consistent with the requirements is in contact with a power outlet is good.
2. When the first use of hot melt glue gun, electric components will produce a slight mist, this is a normal phenomenon disappear automatically after ten minutes.
3. After the power is turned on, the glue gun can not be a long time in the standby state (no more than 20 minutes); when suspended, pull the plug.
4. Not in the cold wind blowing straight down to work, otherwise it will reduce the work efficiency and loss of power.
5. Foes not apply to bond heavy objects or objects need strong sticky
6. Use strips of quality will directly affect the quality of hot melt glue gun features and work items.
7. This tool when not in use must be placed on its stand.
8. Please do not replace the power cord, if you need to replace the power cord, must be consistent with the relevant personnel servicing the product before electrical appliances replacement.
Packing includes:
1 x NL-308 Adjustable Hot Melt Glue Gun
Details pictures:
.jpg)
